PAS 9416/AO : 16 Channel +/- 35 Volt VME Amplifier Card with Offset
Links to printable product info:
The PAS 9416/AO provides sixteen amplifiers and offset voltage
circuits on a 6U format VME card. This amplifier is pin compatible
with the PAS 9716/AO 16 channel, 16 bit analog output card. By using
the combination of these two cards, a VME based analog output system
can be constructed that will supply up to +/- 35 Volts and up to
20 mAmps of output current per channel.
External supplies can be used to power the amplifiers, and a front
panel connector is provided for wiring to these supplies. As an
option, on board DC to DC converters can be provided to power the
amplifiers. The front panel also provides two DB 37 connectors.
One terminates the input signals and the other provides the amplified
output signals. Both of these connectors have the same pin out as
the PAS 9716/AO analog output card.
The offset voltage is applied to all the channels, and can either
be provided by an external source or by the on board reference circuit.
This circuit provides two adjustable reference voltages and a relay
for selecting one of them. The relay can either be controlled by
an external signal or by one of the PAS 9716/AO card's digital outputs.
Custom versions of this board can be provided with gain and offset
voltage tailored to the application.
Key Features
-
16 Amplified and Offset Channels
-
Output Drive of up to +/- 35Volts and +/- 20 mAmps
-
Gain of 1 or 2 Jumper Selectable
-
External Supply Voltage of +/- 15 Volts to +/- 45 Volts
-
On board DC to DC Power Supplies are Available
-
55 KHz Full Power Bandwidth, @ 35 V pk-pk V out
-
2 Front Panel Status LEDs Driven by the PAS 9716/AO Digital Outputs
-
DB 37 Input and Output Connectors, Compatible with PAS 9716/AO card
Contact us for current pricing:
|