| |
PAS 9418/AO : 16 Channel +/- 85 Volt
VME Amplifier Card
Links to printable product info:
The PAS 9418/AO provides sixteen high power buffer amplifiers
on a 6U format VME card. This amplifier is pin compatible with the
PAS 9716/AO 16 channel, 16 bit analog output card. By using a combination
of these two cards, a VME based analog output system can be constructed
that will supply up to +/- 85 Volts and up to 50 mAmps of output
current per channel.
External power supplies are required to power the amplifiers, and
a front panel connector is provided for wiring to these supplies.
The front panel also provides two DB37 connectors. One terminates
the input signals and the other provides the amplified output signals.
Both of these connectors have the same pin out as the PAS 9716/AO
analog output card.
The maximum current and voltage that can be delivered by the amplifiers
is primarily determined by the amplifier's power dissipation. This
is dependent on the supply voltage and the load impedance. Custom
versions of this board can be provided with gain and output drive
tailored to the application.
Key Features
-
16 High Power Amplified Channels
-
Output Drive of up to +/- 85 Volts and +/- 50 mAmps
-
Input Voltage of +/- 10 Volts, Compatible with PAS 9716/AO Card
-
Gain of 3 or 6 jumper Selectable
-
External Supply Voltage Range is +/- 50 Volts to +/- 100 Volts
-
30 KHz full power bandwidth, @ 120 V pk-pk V out
-
2 Front Panel Status LEDs, driven
by PAS 9716/AO card's digital outputs
-
DB 37 Input and Output Connectors, Compatible with PAS 9716/AO pin out
Contact us for current pricing:
|
|
Amplifier Cards
Model: PAS 9416/AO
16 Channel, +/- 35 Volt VME Amplifier Card with Offset
Model: PAS 9417/AO
(NEW)
16 Channel, 80 Volt, 50mA Amplifier Card
Model: PAS 9418/AO
16 Channel, +/- 85 Volt VME Amplifier Card
Model: PAS 9422/AO
16 Channel +/- 200 Volt VME Amplifier Card |
|
 |
