Analog Input

Analog Output

Amplifier Cards

Digital Input/Output

Custom Engineer Services

Remote Input/Output

PAS 9732/AI : 8 Channel 14 Bit VME Analog Input Card

Links to printable product info:

• Product Manual (PDF)

The PAS 9732/AI is a VME based, eight channel, 14 bit, 3 MHz per channel, Analog Input Card. This card is available in two versions, the 9732 and the 9732-001. The difference between the two is that the 9732 is 0 to 10 Volt while the 9732-001 is +/- 10 Volt. This card can be used in VME systems with A16, A24, or A32 addressing, and data bus widths of 16 and 32 bits are supported. Jumper plugs are used to configure the width of the address and data buses. Eight high speed Analog to Digital Converters (ADCs) with 3 MHz conversion rates continuously scan the analog input signals, that are connected to a 25 pin D connector mounted through the front panel. A board identifier PROM, test registers, and a control register are also provided.

Key Features

• 8 channel, 0 to 10 Volt (9732) or +/- 10 Volt (9732-001), 14 bit Analog Input Card 3 MHz per channel continuous sampling on all channels

• VME 6U form factor; 233 mm x 160 mm card size

• VME access: D32, D16; A32, A24, A16

• Right justified sixteen bit integer data. Digital input looks like contiguous memory

• Channel zero input data on 64 bit boundary

• Optional VME SYSFAIL assert on power up, SYSFAIL LED and Board Access LED on front panel

Contact us for current pricing:

Analog Input

Model: PAS 9723/AI (NEW)
32 Ch. Simultaneous Sampling 12 Bit VME Analog Input Card

Model: PAS 9732/AI
8 Channel 14 Bit VME Analog Input Card

Model: PAS 9737/AI
64 Channel 16 Bit VME Analog Input Card

Model: PAS 9739/AI
39 Channel Photodiode and Dual ADC VME Analog Input Card