PAS 9737/AI : 64 Channel 16 Bit VME
Analog Input Card
Links to printable product info:
The PAS 9737/AI provides 64 analog input channels multiplexed
into a scanning 16 bit Analog to Digital Converter, (ADC). Several
different scanning modes are supported, and input voltage ranges
from +/- 10.24 Volts to +/- 80 mVolts are available. Low pass filters
are provided for the analog input signals and four different cutoff
frequencies are available as options.
An ADC time out monitor is provided to ensure the ADC is operating.
Digitized analog data is available to the VME bus through a dual
ported RAM interface that can be read while the card continues scanning.
VME systems with A16, A24, or A32 addressing are supported, which
allows the card’s base address to be located anywhere in the
VME address range.
External synchronization input and output signals are available
in a separate six position connector at the front panel. Additional
features include a board identifier PROM, control and status register,
and scan configuration registers.
Key Features
-
64 differential analog input channels
-
Differential or single ended inputs jumper configurable per channel
-
Optional low pass filters with corner frequencies of 10 Hz, 50 Hz, 100 Hz or 500 Hz
-
Analog inputs on 2 ea. 64 position connectors, allows the use of mass termination cable
-
16 bit 100 KHz Analog to Digital Converter (ADC)
-
Constantly scans selected channels and stores digitized results in dual port memory
-
ADC time out bit provided in the status register
-
VME 6U form factor; 233 mm x 160 mm card size
-
VME access: D16; A32, A24, A16 Slave
-
Four LEDs provided on the front panel; Pass, Fail, Board Access, & ADC stopped LEDs
Contact us for current pricing:
|
