PAS 9742/DO : Receiver Gate Generator
and
VME Analog Output Card
Links to printable product info:
The PAS 9742/DO is a VME based, pulse generator and eight-channel
analog output card. This card generates two digital output signals
in response to a sync pulse input. These two TTL level output signals
are known as Receiver Gate, (RG) and Time of Arrival, (TOA). Two,
32 bit wide registers on the card, which are written to over the
VME bus, control the width of the pulses. The card also provides
eight, twelve bit analog output channels.
Key Features
-
Receiver Gate (RG) and Time Of Arrival (TOA) output
signals
triggered by Sync input
-
Width of RG and TOA is controlled by
32 bit registers written
from the VME bus
-
Pulse Width resolution is 1 microsecond
-
TOA signal is a re-triggerable
one shot, RG signal is
non
re-triggerable
-
A multiplexer selects the Receiver Gate
or the Pulse signal
to drive the MSMT connector
-
Eight each, twelve bit voltage output
DAC’s controlled by
the VME bus
-
DAC outputs are 0 to 10 Volts with 10
mA output drive
current capability
-
Input / Output lines are terminated on 16
SMC connectors
at the
front panel
-
Board identifier PROM; ID code is
VMEID PAS9742DO *.
(* Is revision
level)
-
Four LEDs at the front panel provide
the following status:
Pass, Fail, Pulse Enable, Multiplexer Select
-
VME SYSFAIL asserts
on power up, jumper selectable
-
VME access: D32, D16, A32,
A24, A16 Slave
-
VME interrupts, none
-
VME 6U form factor; 233 mm x 160 mm card
size.
Contact us for current pricing:
|
