PAS 9412/AI : Analog Input Resistor Termination

The Analog Input Resistor Terminator provides current to voltage conversion resistors for an 8 channel RPT Analog Input card. The resistors are mounted on a small Printed Circuit Board that also contains a right angle card edge connector that plugs onto the analog input card. All of the connections from the analog input card to the I/V resistors are made by the PCB. The PCB also provide cable termination points for the analog input cables. A plastic hood encloses the connector and printed circuit board and provides electrical insulation from adjacent connector assemblies.

Different I to V resistor values can be provided as options, and the terminator assemblies can also be provided with cables attached.

Signal Connection List

	Al Card	Cable Connection
CH0 High	401	J1-2
CH0 Low	301	J1-3
CH0 Shield	302, 402	J1-1
CH1 High	404	J2-2
CH1 Low	304	J2-3
CH1 Shield	303, 403, 405	J2-1
CH2 High	406	J3-2
CH2 Low	306	J3-3
CH2 Shield	306, 406, 308	J3-1
CH3 High	410	J4-2
CH3 Low	310	J4-3
CH3 Shield	309, 409, 311	J4-1
CH4 High	413	J5-2
CH4 Low	313	J5-3
CH4 Shield	312, 412, 312, 412	J5-1
CH5 High	416	J6-2
CH5 Low	316	J6-3
CH5 Shield	315, 417, 315, 417	J6-1
CH6 High	419	J7-2
CH6 Low	319	J7-3
CH6 Shield	318, 320, 420	J7-1
CH7 High	422	J8-2
Ch7 Low	322	J8-3
CH7 Shield	321, 421	J8-1

Contact us for current pricing:

Special Use Products

RTP Enhancements

Model: PAS 9310/FO
Fiber Optic Bus Extender

Model: PAS 9347/AI
16 Channel, 12 Bit, 10 kHz RTP Analog Input Card

Model: PAS 9420/AOT
4 Channel Test Fixture for RTP Analog Output Card

Model: PAS 9420/AIT
8 Channel Test Fixture for RTP Analog Input Card

Model: PAS 9420/ROT
12 Channel Test Fixture for RTP Form C Relay Output Card

Model: PAS 9420/DIT
16 Channel Test Fixture for RTP Digital Input Card

Model: PAS 9412/AI
Analog Input Resistor Termination

954-587-0668
7540 N.W. 5th Street, Suite 2 • Plantation, FL 33317

Info@precisionanalog.com